Second hand – Daystar Quark H-alpha eyepiece for the chromosphere

€975.00
Availability: In stock
Only 1 left
SKU:
U-02846

Second hand – Daystar Quark H-alpha eyepiece for the chromosphere

The Daystar Quark DSZ4C H-alpha Eyepiece is designed for observing the solar chromosphere.

The world's first H-alpha eyepiece designed for refractors from f/4 to f/9.

The QUARK is an integrated system consisting of a 4.3x telecentric Barlow lens optimized to operate at the 656 nm passband (the H-alpha emission line), a Daystar Fabry-Pérot etalon filter, and a set of adapters for immediate use with any refractor from f/4 to f/9.

For solar chromosphere observation, there is no specific reference passband variant, but rather a single optimized version.

The chromosphere version typically provides a bandwidth of approximately 0.5/0.3 Ångström.

For apertures larger than 80 mm, the use of a UV/IR cut filter as an ERF (Energy Rejection Filter) installed before the QUARK is recommended.

For apertures of 150 mm and above, and whenever the telescope is used for extended observing sessions (for example, several hours), the use of an ERF mounted in front of the objective lens is recommended.

Features a 1.25" eyepiece holder with a bronze compression ring.

Powered via USB 5 V, 1.5 A max. Includes a 90–240 V AC power supply with various plug adapters.

Passband tuning knob with ±0.5 Å adjustment and 0.1 Å index markings. LED indicators show power, heating, system ready, and system error status.

Integrated 4.3x two-element telecentric Barlow, optimized for operation in the 656 nm H-alpha wavelength.

Internal 12 mm blocking filter with a 21 mm clear aperture.

Optimized for use with refracting systems from f/4 to f/8.

The entire solar disk can be viewed with focal lengths up to approximately 450 mm.

Also suitable for solar imaging.

Regarding the need for an Energy Rejection Filter (ERF), it is not strictly necessary on small-aperture telescopes (approximately 80 mm), although whenever the telescope tracks the Sun for extended periods, the use of an ERF is recommended.

The first optical element of the QUARK "eyepiece" features a dielectric coating that rejects excess energy.

Although this element heats up during use, it does not affect tuning, since only the final optical element requires electronic thermal regulation.

We therefore recommend using an ERF on all telescopes with apertures greater than 80 mm, and whenever the telescope is pointed at the Sun for extended periods.

On refractors up to approximately 130 mm in aperture, a UV/IR cut filter installed before the diagonal is sufficient.

In this configuration, it acts as an ERF.

For Petzval refractors or oil-spaced refractors, the use of an ERF installed in front of the objective lens is recommended.

For all reflecting telescopes and for all telescopes with apertures of 150 mm or larger, the use of an ERF mounted in front of the telescope aperture is recommended.


More Information
Product Status Second hand
Package width 35 cm
Package height 20 cm
Package depth 20 cm
No. of parcels 1
Write Your Own Review
You're reviewing:Second hand – Daystar Quark H-alpha eyepiece for the chromosphere