Pegasus Astro DMFC Premium kit for Celestron 6", 8" and 9.25" SC

€395.00
Availability: In stock
SKU:
PegasusAstro-DMFC-otticheCelestron

Pegasus Astro DMFC Premium kit for Celestron 6", 8" and 9.25" SC. Includes Pegasus Astro Dual Motor Focus Controller controller, one high resolution stepper motor, one Celestron SCT bracket to attach motor to your focuser, one motor coupler and one RJ45 cable that connects controller to motor.

Brands:

Pegasus Astro DMFC Premium kit for Celestron 6", 8" and 9.25" SC

Pegasus Astro DMFC Premium kit for Celestron 6", 8" and 9.25" SC. Includes Pegasus Astro Dual Motor Focus Controller controller, one high resolution stepper motor, one Celestron SCT bracket to attach motor to your focuser, one motor coupler and one RJ45 cable that connects controller to motor.

ASCOM compliant software and standalone software available. INDI Support available.

Dual mode

The Dual Motor Focus Controller supports two kind of motor types:

  • High Resolution Stepper motors (unipolar and bipolar) for absolute position focusing.
  • DC motors by its Pulse Width Modulation duty cycle control.

Controller can switch motor mode from its software, Mode can be instantly changed (with one mouse click) from ‘stepper’ to ‘dc’ motor and saved in controller’s EEPROM memory.

Manual and PC operation

The controller can be operated by PC using its USB2 connectivity. A manual operation by utilising the digital encoder on the side of the controller simulates the knob of your real focuser. Turn the knob as it is the knob of your telescope’s focuser. If you press it, speed of the motor will be reduced to 1:10.

Dual Colour Indicator

A dual colour light emitted diode (Green / Yellow) is fitted on the side of the unit. Each colour indicates speed and the led can be turned on or off by its software during an observing session. Keep it pressed to disable the knob.

Robofocus compatible connector pin out

Motor output is fully compatible with “Robofocus ©” pin out. Output can drive most of the motors in the market. Take a look in our F.A.Q tab.

Temperature Probe

An external digital temperature sensor input is located near the motor connector. A digital probe of one (1) meter length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe always included in package)

Backlash Compensation

Controller can compensate the backlash you might encounter in your system. Although our motor has very low backlash other setups might need this feature. Backlash compensation is supported from a function inside controller’s firmware.

ASCOM compliant

The controller is fully compatible with latest ASCOM 6 and can easily be controlled from a computer.

INDI (Open Astronomy Instrumentation) compliant

Pegasus DMFC driver is included with libindi >= 1.5.1
Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html

Standalone program support

The controller can be operated by the standalone DMFC software. (Only available for Windows OS)

Firmware upgrade support

Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

Two Years warranty

Warranty covers the controller device including the temperature sensor and the Pegasus Stepper Motor Focus kit.

In the box

  • DMFC controller for unipolar stepper motors and DC motors
  • External temperature probe with 9 bit resolution. Cable length 1 m.
  • USB cable for PC connection.
  • RJ45 cable for DMFC controller link.
  • Celestron SCT bracket
  • High resolution unipolar stepper motor (Step Angle 7.5, Deg 120, Gear Ration 1:120) wih pulley
  • 20cm 2GT Timing Belt
  • 13 mm Pulley 2GT (6”, 8”, 9.25”)

 

Pegasus Astro Dual Motor Focus Controller DMFC

Pegasus Astro Dual Motor Focus Controller DMFC for unipolar and bipolar stepper motors. Compatible also with DC motors with PWM modulation. The product includes DMFC USB controller for stepper and DC motors, external temperature probe and USB cable.

ASCOM compliant software and standalone software available. INDI Support available.

Dual mode

The Dual Motor Focus Controller supports two kind of motor types.

  • High Resolution Stepper motors (unipolar and bipolar) for absolute position focusing.
  • DC motors by its Pulse Width Modulation duty cycle control.

Controller can switch motor mode from its software, Mode can be instantly changed (with one mouse click) from ‘stepper’ to ‘dc’ motor and saved in controller’s EEPROM memory.

Manual and PC operation

The controller can be operated by PC using its USB2 connectivity. A manual operation by utilising the digital encoder on the side of the controller simulates the knob of your real focuser. Turn the knob as it is the knob of your telescope’s focuser. If you press it, speed of the motor will be reduced to 1:10.

Dual Colour Indicator

A dual colour light emitted diode (Green / Yellow) is fitted on the side of the unit. Each colour indicates speed and the led can be turned on or off by its software during an observing session. Keep it pressed to disable the knob.

Robofocus compatible connector pin out

Motor output is fully compatible with “Robofocus ©” pin out. Output can drive most of the motors in the market. Take a look in our F.A.Q tab.

Temperature Probe

An external digital temperature sensor input is located near the motor connector. A digital probe of one (1) meter length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe always included in package)

Backlash Compensation

Controller can compensate the backlash you might encounter in your system. Although our motor has very low backlash other setups might need this feature. Backlash compensation is supported from a function inside controller’s firmware.

ASCOM compliant

The controller is fully compatible with latest ASCOM 6 and can easily be controlled from a computer.

INDI (Open Astronomy Instrumentation) compliant

Pegasus DMFC driver is included with libindi >= 1.5.1
Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html

Standalone program support

The controller can be operated by the standalone DMFC software. (Only available for Windows OS)

Firmware upgrade support

Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.

Two Years warranty

Warranty covers the controller device including the temperature sensor and the Pegasus Stepper Motor Focus kit.

In the box

  • DMFC controller for unipolar stepper motors and DC motors
  • External temperature probe with 9 bit resolution. Cable length 1 m.
  • USB cable for PC connection.

On request we can supply custom cables to connect your motor. Plese inquire.

 

Pegasus Astro Stepper Motor Focus for Celestron 6", 8" and 9.25" SC

Pegasus Astro Stepper Motor Focus for Celestron 6", 8" and 9.25" SC. Includes: high resolution stepper motor, motor bracket for mounting onto Celestron SCT telescope, pulley, timing belt, bolts. Motor link cable not included. Motor uses RJ45 serial connector.

Requires a suitable controller such as the Pegasus Astro Stepper Motor Focus Controller (SMFC) or Pegasus Astro Dual Motor Focus Controller (DMFC).

In the box

  • High resolution geared stepper motor (Step Angle 7.5, Deg 120, Gear Ration 1:120). Its gearbox has very low backlash and high torque suitable to focus in micron scale.
  • Blue Aluminium Anodised Bracket for Celestron SCT Telescopes
  • 20cm 2GT Timing Belt
  • 13 mm Pulley 2GT (6”,8”,9.25”)
  • Bolts

More Information
Product Status New
Write Your Own Review
You're reviewing:Pegasus Astro DMFC Premium kit for Celestron 6", 8" and 9.25" SC