Vixen ASG-CB90 carbon fiber field...
ZWO 30 mm F4 mini guide scope, compatible with all ASI cameras. Focal length 120 mm, weight (include guider ring and dovetail) 250 g, back focus 0~20 mm, tube travel 20 mm. Dovetail includes 1/4" screw hole.
SkyWatcher Evoguide 50 ED refractor optical tube for guiding or as finderview. Features 50 mm diameter, 242 mm focal length (F/4.8), helical focuser with T2 thread, 1.25" eyepiece holder.
QHYCCD Mini Guide Scope for QHY5-II autoguiders. Ultralight and cheap solution for short focal lenght imaging systems. Compatible with any autoguider with CS thread and 12.5 mm back focal length using the included spacer. Directly compatible with any C thread guider camera without any spacer.
SkyWatcher 102/500 achromatic refractor guide scope features 102 mm lens and 500 mm focal lenght F/5 with 31.8 mm eyepiece holder, mounting rings, EQ5 dovetail bar and 6x30 finder view.
PrimaLuceLab 60 mm CompactGuide scope with PLUS rings is a perfect guide scope with 60 mm diameter and 240 mm focal length (F/4) achromatic lens, non rotative 31,8mm helical focuser and 80 mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to fast focus adjustment, it can also be used as a powerful optical...
A Pair Of Rings With Driving Electric Motors With Micrometric Movement Of The Pistons. The Kit Includes: Italy 2 Rings Inside Diameter 130 mm, Photo 2 Electric Motors 9V, Photo 2 Remotes Adjustment 2 Mechanical Push 2 Mechanical Piston.
The Plate Is Hooked On Frames Takahashi And Allows To Position The One Hand The Refractor, Via Respective Cradle, That Will Be Used As A Telescope Pictures And The Other Side A Frame Driving Tgm-1 Or Tgm-2.Dimensioni 180X350 mm
The Plate Is Hooked On Frames Takahashi And Allows To Position The One Hand The Refractor, Via Respective Cradle, That Will Be Used As A Telescope Pictures And The Other Side A Frame Driving Tgm-1 Or Tgm-2.Dimensioni 125X300 mm
A low-profile mount for installing a guide scope in astrophotography. It allows for adjusting the orientation of a guide scope by +/- 6.5 degrees in altitude and azimuth directions. It is attached to Accessory Plate DX or AXD Large Accessory to install a guide scope by using Dovetail-plate Mounting Block.