Filtra articoli
PrimaLuceLab GIOTTO 120 Smart Flat Field Generator
Cercatore ottico SkyWatcher 9x50 con...
Baader Planetarium Four-In-One adapter M68/T-2/M68
Baader Planetarium Ultrashort 2" eyepiece clamp
Baader Planetarium ClickLock 2" (50.8 mm) eyepiece holder with M72 thread (Takahashi standard).
Baader Planetarium 2" Four-in-One adapter holds: all Zeiss devices - with 68mm thread (with 19mm optical height), keeps all Vixen Optics - with 60mm thread on the focus tube (with 24mm optical height), all Astrophysics refractors with 2.7 "thread (with 13mm optical height), all Skywatcher / Celestron refractors, and all Synta optics - with 56mm thread on...
Baader Planetarium 31.8 mm nosepiece - T2 adapter. Allows you to mount your T-2 accessories or Digital Camera into standard 1.25" focusers or accessories. This enables you to do prime focus photography. The nosepiece has an external T-2 thread on one end for attaching to T-2 system components.
Baader Planetarium Clicklock 31.8 mm eyepiece clamp with built in diopter-adjustment. Precise focusing eyepiece holder 1¼"/T-2 (5 mm focus travel).
Baader Planetarium 50.8 mm nosepiece - T2 adapter. Baader 2" / T2 Nosepiece for CCD and DSLR cameras.
Baader Planetarium Takahashi Adapter M72/M68 (Zeiss)
Takahashi 31.8 mm Compression Ring eyepiece holder. This 1.25" Ocular Adapter from Takahashi is for 1.25" eyepieces and diagonals. It has a two-point compression ring and chrome set-screws for a firm hold on your diagonal or eyepiece.
Camera Adapter 1.25" to male T Thread. Allows to connect DSLR or CCD camera with T thread onto 1.25" eyepiece holder. Accepts 1.25" threaded filter.
PrimaLuceLab 2" visual back for ESATTO 2" and ARCO 2"
Meade 2" Accessory Adapter #07085 for Meade ACF, SCT, and LS models. Converts the rear cell thread of the telescope to a 2" slip fit, allowing use of 2" accessories such as 2" slip fit diagonals and 2" eyepieces on Meade LX90 and LX200 models of all years and sizes.
Allows You To Use Eyepieces Or Diagonal 50.8mm Directly On The Cell Of Schmidt Cassegrain. E 'Equipped With A Locking Ring In Bronze Instead Of The Common Locking Screw, Thus Allowing A Block Much Safer. In Addition, The Ring Does Not Damage The Eye As The Screw.
Astro-Physics 2" to 1.25" adapter with brass locking ring and thread for 48 mm filters.
" Eyepiece Low-Profile 2" "For Focusers 2.7" "And 4". "Thickness 0.43" "(10.9 mm). "
Auriga Twist Lock 2" adapter to 1.25" eyepiece holder with Quick Lock. This adapter allows to use 1.25" eyepieces or others accessories onto 2" telescope focuser or diagonal.
Auriga Twist Lock 2" eyepiece holder with Quick Lock for Schmidt-Cassegrain. This SCT visual back allows to use 2" eyepieces or others accessories onto SC telescopes.
This Vixen adapter is designed to fit any focuser drawtube with a 60mm thread, this adapter will allow standard 2" accessories to be slide into its bore 13 mm or 34 mm light pass (reversible). Fits all Vixen telescope with M60 threaded focuser.